Our store is actually a large restaurant that we purchased fifteen years ago. One of the most interesting areas of the building is the kitchen and walk-in icebox. That's the area where screams of excitement and joy are heard from time to time when a local boater finds the perfect raw water pump for his Chrysler Crown gas engine priced at only $20.00 or a Borg Warner 72-C gear box for a modest price of $300.00. Yes, that's Minney's engine room. It's all there but you gotta dig. Please don't call looking for pigtails for your Westerbeke diesel engine, or impellers for the salt water pump on your 4-53 Detroit. It's probably there but we don't have the time or knowledge to locate the proper part for you. Raw water strainers, stuffing boxes, alternators, generators, Morse control and Hynautic shifters and parts, impellers, zincs, hundreds of outboard and out drive propellers, heat exchangers and on and on? If it lives "below the floorboards" we probably have it and it will be priced RIGHT!
Tuesday, October 25, 2011
MINNEY'S ENGINE ROOM. UTOPIA FOR OLD BOATS!!!
Our store is actually a large restaurant that we purchased fifteen years ago. One of the most interesting areas of the building is the kitchen and walk-in icebox. That's the area where screams of excitement and joy are heard from time to time when a local boater finds the perfect raw water pump for his Chrysler Crown gas engine priced at only $20.00 or a Borg Warner 72-C gear box for a modest price of $300.00. Yes, that's Minney's engine room. It's all there but you gotta dig. Please don't call looking for pigtails for your Westerbeke diesel engine, or impellers for the salt water pump on your 4-53 Detroit. It's probably there but we don't have the time or knowledge to locate the proper part for you. Raw water strainers, stuffing boxes, alternators, generators, Morse control and Hynautic shifters and parts, impellers, zincs, hundreds of outboard and out drive propellers, heat exchangers and on and on? If it lives "below the floorboards" we probably have it and it will be priced RIGHT!
Monday, October 24, 2011
Chris Craft & Riva Speed Boat Models.......
Sunday, October 23, 2011
YOUR AUTO PILOT CAN KILL YOU !!!

I recently made note about a woman delivering a fifty foot sailboat from Tahiti to Southern California. While motor sailing near the equator she came on deck one morning and found the watch stander missing. The boat was on auto pilot and traveling at eight knots. She had told Jim at midnight to rouse her at 0330. It was now 0630. The pelican hook was open and the starboard stanchion gate was down. Jim was probably taking a leak, leaned against the gate, it opened and he fell overboard. He was now treading water somewhere along a fifty two mile course line. Her radio was in operative so she couldn't call for an air search. She searched for three days and then headed for Hawaii dreading the heart wrenching phone call she must make to Jim's parents.
Every year auto pilots get boaters into trouble. Most skippers are lucky and only damage or lose their boats. Bill Kitchens, a good friend of mine departed the Dana Point harbor yacht club one evening at sunset. He cleared the red bell bouy marking the reefs off Dana Point. He put his Hans Christian 36 cutter on course for the Newport Beach break water and engaged the auto pilot. It was a chilly evening and spray was coming aboard. He ducked under the dodger and relaxed a bit. Two hours later he was startled awake as his forty foot mast, boom and rigging came crashing down and landed next to him. His navigation had been spot on. He missed colliding with the Newport jetty by about fifty yards, his boat continued on and went under the Balboa pier about a mile north west of the breakwater.
Captain Ron as the locals called him had raced his boat "Naughty Gal" in a series of races off Long Beach. Ron and his crew had done well in the two day series and partied a bit at the Long Beach Yacht Club before the trophy awards. After picking up his trophy and bidding his crew farewell he headed "Naughty Gal" out of the Long Beach marina, and put his finely tuned thirty six foot race boat on course for Newport and set the auto pilot. It had been an exciting and exhausting weekend. "Naughty Gal" was motoring nicely in the westerly swell and Ron perhaps dozed a bit as his boat ticked off the miles. A horrendous crash brought Ron to reality as his entire rig came crashing down on deck. It was pitch black. There was a strong order of diesel fuel and the sound of powerful diesel engines. "Naughty Gal" was trapped under what seemed like a monster out of a horror movie and was crashing and slamming into some type of pilings and steel beams. Then it dawned on our good captain. He was under oil platform Eva which was about a mile north west of the Huntington Beach pier.
Think these stories over. I've got dozens more and I'm sure you do to. The solutions and preventions are simple and basic but the accidents keep happening. I think often of Jim on his first and last ocean passage treading water in the warm equatorial currents as he watched the bright stern light of the yacht get dimmer and dimmer and finally disappear.
Pictured is a lovely boat we recently purchased salvage from. While a bit south of Bahia de Los Angeles in the Sea of Cortez off the Baja coast the skipper had his boat on auto pilot, thought he was further off shore and took a little nap. The eighty year old skipper was not injured, his boat was a total loss. I've got the mainsail and jib and some nice self tailing winches off it at the store....
Saturday, October 22, 2011
Nautical Belts
As you all know, the mark of a man isn't the car he's driving or the watch he's wearing. You guessed it, it's the belt he's wearing! Old Spice cologne doesn't cut it with with the ladies anymore. But, a nautical belt from Minney's does. Pictured is our great selection of salty belts that are priced within the budget of the most frugal sailor. Leather belts embossed with schooners, colorful signal flag belts, and other nautical themes. Prices start at $19.95. If your "pick up"lines at your local pub are as stale as last night beer, say nothing to the lass at the end of the bar and let the belt you are wearing from Minney's do the talking. Yes, with a new belt from Minney's, your "single handing" days are over...........
Friday, October 21, 2011
TIE DOWNS & SAIL TIES. "YOU KNOW YOU NEED THEM."
Do we have a deal for you! We've been dealing with a rope company for years that makes "small stuff" for us. They take all their excess fiber and braid some pretty exotic nylon and polyester line for us. We cut it in various lengths and blow it out to you guys for pennies on the dollar as sort of a good will gesture. On a recent trip on my little sloop I used our tie downs to lash my rubber boat to it's chocks, lash my outboard motor to my stern rail, lash two fuel tanks to my back stay turnbuckle, lash my fishing poles, boat hook and gaff to my forward grab rails, lash my main halyard to the boom goose neck, pull my Delta anchor up tight on my bow roller, as a safety line on my boarding ladder, a safety line on my outboard motor, secure my Honda generator to a bulkhead, secure my port potty to a bulkhead and probably a few other uses I can't remember. As you all know, tie downs come in handy.
Also, sometime ago we stole 35 spools of first quality nylon one inch webbing. We've been cutting it into six foot lengths and practically giving it away at ninety five cents a tie. I take a lot of pride in properly furling my sails. I usually have a bowline in one end of the sail tie. After I circle the sail and boom I thread the other end through the eye of the bowline and now have some real leverage to snug the sail neatly on the boom. I don't think the old saying, "you can always tell a sailor by the cut of his jib" is correct. In my mind, "you can always tell a sailor by how neatly he furls his sails" is a bit more on target.
Thursday, October 20, 2011
ACCESS HATCHES........ GREAT VALUE!!!!!
Pictured is a quality access hatch that we have in two popular sizes. The cut out hole size for the big one is 9-3/4 x 19-1/2 with an overall size of 13-3/4 x 23-3/4. These hatches can be mounted flat or vertically. To be able to sell these hatches at about half the price of the big box stores, we had to purchase 400 of them. The small one is only $29.00 and the large one is $49.00. We're going through them fast so order now. One customer purchased six of them for his motor home and a contractor purchased three big ones to use on a tool box he is building for his pick up truck.
They come in two colors, light cream and gray.....
Wednesday, October 19, 2011
PASSAGE MAINSAILS.........
PASSAGE MAINSAILS.........
Passage mainsails, "the sail your sail maker won't tell you about?" When I purchased "Shearwater," part of the sail inventory was a "passage mainsail." I didn't use it on the delivery of the boat from Miami to Newport Beach because the winds were too variable and we motored a lot. A couple of years later when we were making the passage from Newport to the Marquesas I found it invaluable. I had novice college kids crewing for me and the thought of an accidental jibe with the 26 foot, two hundred pound boom and thousand square foot mainsail in the middle of the night was a bit nerve wracking. After a couple of near jibes as we entered the north east trade winds I dropped the big main and set the "passage mainsail." It is shaped like a tri'sail but is about as big as your full mainsail with one reef in it. It bends on your sail track and is loose footed like a jib. Mine also had a set of reef points so I could use it for a storm tri'sail if I wanted to. I grew to love this sail and used it 80 percent of the time as we circled the globe. A gal named Jill that I picked up in New Zealand would almost always jibe the boat once every night when she was on watch. "Something is wrong with the compass", she would tell me as I scurried on deck, sorted things out and got her back on course. No problema, I would think. The "passage mainsail" would back like a jib, no damage was done and I didn't have to get upset with Jill for nearly dismasting my schooner. Another great thing about "passage mainsails" is that they can be made out of your old mainsail or a good used mainsail from another boat. On a long passage in the trade winds your main is up sometimes for twenty or thirty days. For me, Cape Town to Barbados was forty days. Why be cutting your stitching and chafing holes in your $5000.00 new mainsail on the spreaders and shrouds when you could be doing this to one of Minney's $500.00 used mainsails that you had re-cut for a couple of hundred bucks. You will not only get a great nights sleep knowing that the kid you picked up at your last port and is paying you $10.00 a day to sail with you is steering your boat can jibe any time he gets confused and the jibes and will do no damage: but, you will be saving your $5000.00 new North mainsail for going to weather, coastal work and cruiser races in various ports.
Tuesday, October 18, 2011
FRESH FISH EVERY OTHER DAY...........
For all you guys outward bound, here's a few fishing tips. We caught hundreds of fish with our two hand trolling lines with rubber shock cords on them. 500 lb. test mono filament works great, so does 1/8" braided nylon line. The shock cords are attached to the line so they will be visible to the helmsman on woman. Your after shrouds will work great and the helmsman won't have to be constantly looking behind the boat to see if the shock cord is streached out. A good pair of heavy leather gloves is a good idea and also having a gaff with a good long handle will be of use. We mainly used Jap heads with large double hooks and feathers of various colors. Fish up to about 20 pounds you can just heave over the life lines and onto the deck. We found a short line attached to the boat and a quick clove hitch around the tail of the thrashing fish was a good idea because quite often the fish would manage to jump back over the side of the boat. A winch handle works great at giving your wahoo a couple of taps on the head. We were sailing a large boat in the trade winds that had preventers and vang tackles in place. We were usually doing 7 or 8 knots and made no attempt to slow the boat for the smaller fish. The larger fish we would attempt to luff up a bit if it wasn't blowing too hard. Quite often, a monster fish would hit our lines and break everything or tear the hook out of his mouth. We found day break was usually the best time to catch fish and also a day or two out from what ever land fall we were heading to. Fresh fish made up a big part of our diets. We would only eat deep water fish such as tuna or dorado. Reef fish have been known poison people.... After wrapping our trolling lines in our taffrail log spinner a few times we found it best to bring in the log while we were fishing. A little money spent on some trolling gear will provide you with dozens of great fish dinners.....
Monday, October 17, 2011
GREAT SAILS AT GREAT PRICES!!!
While you guys were singing in the choir, playing golf, and frolicking in the park yesterday, I was measuring sails. The batch that we processed was a really great group of sails. Storm jibs and tri'sails, most of them like new. Several of them were "blaze orange" in color. A trend I've noticed the past few years which I think is a good idea. Anyone flying these sails is probably not having a nice day. Should they need a little assistance from the Coast Guard, they will be easy to spot in the turbulent seas. We measured about twenty spinnakers. One totally stood out. A brand new cruising spinnaker with a sock. .75 ounce, pretty colors with a forty foot luff. I priced it at $995.00. I'm sure Mr. North would think it was worth about $2500.00. There were lots of roller furling jibs in great condition. Quite a few of them needed some re-stitching on the covers. Why you guys leave these sails up all winter is beyond me. The sun rots the stitching, green grundge tries to grow inside and they unfurl in heavy winds and turn to shreds. Lots of good mainsails. While me and the boys were doing our thing a customer drops by and ask he he can test a few electronics in a corner of our parking lot. I give him the "go ahead" and soon he his little shop set up. He ran electrical power from the store out to his testing equipment and soon he had four of our radars, 3 chart plotters, a couple off fish finders and boxes of radar cables etc. in his testing area. We kept measuring sails and on his knees on the asphalt he kept testing our electronics. I finally felt sorry for him and brought a big soft sail over for him to play on. Long and short! He purchased a thousand bucks worth of our gear (probably going to sell it for $10,000.00) and we added about eighty great sails to our inventory. They will all be listed on our website in about five days. If you want to get "first dibs", get your butts down here.....
Sunday, October 16, 2011
HIGH LIFE LINES ON OCEAN PASSAGES........

A friend of mine was delivering a 50 foot sailboat from Tahiti to Newport Beach. While motor sailing through the doldrums on auto pilot she left orders for the 2400 to 0400 watch to wake her at 0330. She was quite surprised when sun light beamed her awake though the sky light at 0630. She dressed quickly and went on deck. To her dismay, the boat was steering itself and there was no one on deck. She awakened the the other three crew members, searched the boat from stem to stern and yes, the early morning watch stander was missing. An inspection on deck showed the pelican hook open and the cable was down on the starboard stanchion gate. What a dilemma? Did Jim fall overboard when he first went on watch? Mid way through his watch? Or perhaps later? The boat was traveling at eight knots, he could be treading water anywhere on 52 mile course line. She knew her single sideband radio was inoperative so calling for help was out of the question.
She turned the boat around and motor sailed the opposite course back and forth for 3 days. The crew member was never found and the skipper suffered a mental trauma I don't think she ever recovered from. Two things could have prevented this tragic accident. The first would be to not use the auto pilot during the night watches. This would force the watch standers to be more alert and if they did fall overboard the boat would go in circles and the change in motion and the racket of the sails luffing and backing would be sure to bring other crew members on deck. The other solution was something I did on my lengthy voyage aboard my schooner "Shearwater." I had two small kids aboard and I wanted to keep them on board. As you know, most stanchions and lifelines are too low. If you fall into them they tend to trip you and toss you over the side of the boat. On all passages I rigged what I called "deep sea life lines." This was spare line that I had that I ran about chest high around the entire boat. I then took lighter line and laced it in from the rope life line down to the upper permanent life line. This made a sort of net like arrangement. On several occasions yours truly and other crew members got tossed into them and rebounded back on deck instead of going overboard if the "deep sea life lines" hadn't stopped them. My ship was a schooner and the jury rigged life lines were easy to rig. On other boats you might have to be a bit more creative. Had my friend on her voyage from Tahiti to Newport rigged something like this out of extra line sure to be aboard a boat the size she was delivering. Her favorite crew member might still be alive. Pictured is "Shearwater" running in heavy trade winds across the Indian ocean. Note my "deep sea life lines" in place on the starboard quarter......
Saturday, October 15, 2011
SS STANCHIONS & STANCHION GATES.. SAVE $'S
If you have an Islander, Ericson, Down East, Catalina, Pacific Sea Craft or any other boat built in Southern California, chances are these stanchions will fit your boat. A good friend of mine owns the company that builds these quality 316 SS steel stanchions and stanchion gates. He builds them by the 100's for us when things are slow at his plant. Our standard stanchions come in 24" and 30" lengths. The bases are either square or with a 6 degree slant to account for the crown of your deck. The stanchion gates come in pairs and are matched so that the bases all face the same way when installed. The price of the gates are $125.00 a pair and the stanchions are about $35.00 each. They weight very little so shipping is modest.
Friday, October 14, 2011
NISSAN 40 HP 4-STROKE-STEAL IT !!!
Nice looking Nissan 4-stroke. I haven't heard it running. It appears to need a bit of electrical work. Pictures tell the story. Power head indicates engine has very low hours. Being sold where is as is for $995.00. If you are a mechanic you can triple your money on this one? Josh @949-548-4192 Can be seen at 1500 Newport Blvd. Costa Mesa. This is a copy of a Craig's list ad that I put on line this morning. A woman brought it to us after she lost her husband. We've had it priced at @ $2500.00. Winter's coming and we don't want to hold it till spring. A friend recently purchased a 40 HP Yamaha from Schock boats. She paid $6500.00 for it.....
Thursday, October 13, 2011
GORTON ENGRAVING MACHINE... STEAL IT!!!
Several months ago we purchased the entire contents of a small machine shop. One of the items is a Gorton engraving machine. It was used for cutting out and labeling electrical panels for boats. The machine is in excellent condition and comes with approximately 500 pounds of templates, alphabet patterns, cutter bits and misc. tooling. We estimate that the replacement cost of what we have would be about $10,000.00. There's a huge demand for the items this machine can turn out. Every large yacht has dozens of labels posted about. It will cut on plastic, brass and other metals. We have it priced so it's an absolute steal. $1500.00 and it's yours. It's heavy. Probably a little over 1000 pounds.
Subscribe to:
Posts (Atom)